Hardware manicure - beautiful nails quickly and safely

Contents:

• Adaptations for hardware manicure
• How do hardware manicure

Technology of nail service at the same time improving their requirements. Today, highly qualified nail technician must have in their arsenal not only traditional nail file and tweezers, but also be skilled processing hardware nails. The first to have tested this method the French and Italian beauty salons. Gradually best experience was echoed by other European and American colleagues over the years spread throughout the world.

Hardware manicure over the past ten years has acquired its target audience, which is actively in demand. Compared with the manicure, it is able to provide greater efficiency and improved safety. This type of manicure is ideal for girls with problem, the layer of nails, because the risk of cuts or cracks, and, consequently, the infection is almost reduced to zero. However, this rule applies only if the master is really high-class professional, as otherwise the chance of damage to the skin increases many times.

Hardware manicure - one of the most benign methods of nail care. Rate also those who have observed increased growth of the cuticle. After a hard nail, he slowed down, and at constant carrying out the procedure may be suspended completely. The entire process of performing a manicure with the machine takes about an hour.

The procedure should be done no more than twice a month, recourse to experts in the beauty salon. They tell us how to properly care for your nails after a manicure hardware, as well as help in solving the problems described below.

• Eliminate rough skin, including corn;
• Get rid of unsightly burrs on the fingers;
• Carefully release the nail plate from the delaminated or damaged surfaces;
• Give perfect smoothness and shine marigolds - own or artificial.

Adaptations for hardware manicure

Professional manicure multifunctional device consists of a special device with a rotating mechanism and nozzles of different shape, size, and degree of abrasiveness. Its operation is similar to that used in the dental drill. It must necessarily be possible to select a particular speed limits, since each stage of processing of nails and skin of the hands is inherent in its speed of rotation. Usually it does not exceed the upper threshold of 30 000 rpm.

Another important factor in the configuration of the device, such as a built-piece mini-vacuum cleaner. It protects the master and client from inhaling harmful dust that is inevitable when dealing with the modeling of natural and artificial nails even more. Fan, placed in the handle of the device, preventing overheating.

The mechanization of manual labor is very appropriate for the correction of artificial nails, nail after using the device, and a maximum speed of coarse nozzles can be very easy to achieve the desired effect when stripping chips and cracks of nails, to give them the desired shape, thickness, or smile lines.

Gathered hardware to do manicures, consider another feature: the handle should be kept properly - like a pencil. It is necessary to correctly calculate the ratio of pressing force and rotational speed of nozzles, as too much pressure can result in damage to the nail plate. All the mills during operation must be strictly parallel to the nail, and motion - correction, and cautious, from right to left. When performing a manicure should strictly observe safety rules.

Hardware manicure allows not only the standard procedure of registration of nails: cuticle, correct shape and length. Very nice, he has proven to be such a difficult task as carefully polishing the nail plate, processing problem (ingrown) nails, corns and skin resurfacing side bolsters.

How do hardware manicure

• Before you make the hardware manicure, should take pre-treatment arms. They were thoroughly washed with soap and water and treated with any antiseptic substance;
• After removal of the remnants of the old varnish should be pushed to the cuticle, it gradually stachivaya using alumina fine nozzles in the form of a truncated cone. It is very important not to touch the surface of the nail, so it does not have any longitudinal grooves;
• One advantage of hardware manicure is the fact that the entire nail treatment without softening occurs by "soaking" hands. This prevents leaching of trace elements and does not cause separation of the nail plate;
• Keratinized skin on the side rollers fingers scraped by cylindrical grinding of the cap at a rotation speed of about 15 000 rpm;
• After this point, be cleaned, it should be rounded polished alumina nozzle at a rate of no more than 12 000 rpm;
• Thus, each finger being processed. Upon completion of the procedures applied to nails and cuticles special nutritious oil or cream that strengthen and improve the nails;
• The final chord is a nail polish suede or felt tips. This will give your marigolds manicured and immaculate appearance.

The procedure for using hardware technologies may be required, and as an auxiliary operation, helps get rid of any inconvenience or discomfort in each case. For example, it can help to remove the skin is too rough or smooth the surface of the nail.

In order to make a hardware manicure properly, it is necessary to take into account the individual features of the structure of the nail and skin condition, so without prior consultation with a specialist you can not do. Not knowing the intricacies of the work, can injure the hands, leading to tragic consequences. Go to a beauty salon, watch how the master, ask him your questions. And only after that you can try on their own to carry out the procedure.