Prolongs the life of the iron: clean at home

Contents:

• How can I clean the soleplate?
• How to clean iron at home?
• Oh, this scum
• The best prevention is still nothing came up

The sole of your iron has lost its former luster and do not slip, and he invariably mode stripping "spits" scum and spoils the appearance of things? Sooner or later, such a situation faced by each owner of the iron and, as a rule, expect trouble when you're in a hurry, and you just need to look perfect. In order not to regret the time spent, and spoiled the iron, you can periodically clean the surface of the iron as a preventive measure.

Yes, if we had followed the recommendations of the manufacturer, the question is how to clean iron at home, did not even have arisen. But, alas, few people adhere to temperature and uses only distilled water to the Gulf in the tank. And the use of hard water just leads to the fact that the scum collected in a tank and the soleplate starts to stick to all things. In the most severe cases may even burn on the fabric. Since soot soles getting bigger, until the burnt iron is not sent to landfill.

But if we have to clean the soleplate still able, then with scale it is more complicated. First, it blocks the steam holes, but they still somehow try to cope with its function. However, with the scale steam breaks out and sprinkle your clothes ugly crumbs. If at this stage you do not take any measures, the holes clogged completely and then the temperature sensors and the heating element immediately fail. It's death for your iron.

To prolong the life of the iron, and at the same time not worry about spoiled things, offer to clean iron at home. This can be done as the traditional methods, and with the help of special professional tools

Back to contents

How can I clean the soleplate?

At any hardware store to your question, how to clean the iron sludge, offers special cleaning pen. With their help, you can easily clean the surface of the sole. To do this you need to turn the iron and let it warm up a little. Then you put the pencil to the entire contaminated surface, iron is not off.

As the sole will heat up, the applied layer of the pencil starts to melt and collect all the dirt and scum. When you are satisfied with the result of cleaning, turn off the iron and wipe it from the remnants of a pencil clean, dry cloth. You may need to repeat the procedure more than once before the soles of the surface is clean again.

Remember, cleaning with a pencil rather toxic and can poison vapors allocate funds during heating. In order to avoid contact of corrosive vapors into the lungs, is properly put on a protective bandage.
Back to contents

How to clean iron at home?

In fact, the problem of cleaning irons quite new, and as soon as people began to stroke with the help of this device, the question of how to clean the iron sludge, does not sleep diligent housewives. Over the centuries, it has developed many ways in which you can properly clean the soleplate and ensure your home ironed things. We decided to voice the most popular methods.

• Method №1 - salt to help

It takes newspaper (you can take today, I have not read and do not spoil your mood news) and salt finely ground. Unfold the paper and sprinkle salt on her hill. Sit in a way that was next to the socket - you need to include iron. Leave the iron briefly on and let it warm up well. Now start "iron" salt. Try to press on it hard enough, but do not overdo it and do not scratch the soleplate. After a short period of time you may notice that salt darkens. This means that the process is correct and cleaning takes place. At the end do not forget to wipe the sole with a dry cloth and remove any residual contaminants.

• Method №2 - soda from scale

If the previous method the issue of cleaning the iron is still relevant, then proceed to clean the soda. This method does not require heating of the iron. Take a pinch of baking soda (about the amount, be guided by the degree of contamination of the iron), and diluted it in a small amount of any detergent for dishes. The resulting paste is applied to the soles of burnt iron and begin to scour little pollution. We do everything intensely, so that was not burning any chances. If you scour too difficult, leave the paste on the base of a short while, and then try again. At the end of the procedures required to clean soles clean, dry cloth.

• Method №3 - you can use vinegar

Vinegar is exactly there in the bins at the practical housewives. In order to use it to clean the iron, we need the help of rough cloth. Take a piece of burlap or canvas just any fabric and thoroughly moisten it with vinegar. Wipe cloth the most polluted places on the sole, firmly pressing them. Rubbing will have as long as the purity of the foot you are not satisfied. You can warm up a little iron, then brush away dirt will be better, but the vinegar will evaporate rapidly, and it may be poisonous vapors. Once cleared the iron, it will need to be polished. It's easy to do, just a small piece of carefully ironed any tissue. The main thing correctly set the temperature, otherwise will again have to clean the soleplate.

Back to contents

Oh, this scum

Rust stains on the soleplate say that the water you pour into the tank for ironing, very tough. Ideally, you want to take distilled water, but if you prefer to use what is at hand, that is, water from the tap, then no special tools from scale is necessary. You can use the commercial embodiment as advised all producers, but you can try to remove the scum with citric acid.

One tablespoon of citric acid dissolve in warm water. Fill a cocktail resulting in iron and heat it to the maximum limit. Now take an unnecessary piece of cloth and iron it, allowing openings for steam cleared of scale. No need to iron until the water evaporates completely, - residues must be emptied and rinsed with clean water iron. But once again warn manufacturers of home appliances to the question of how to clean iron at home, it is recommended to contact the professionals and not to engage in independent action, otherwise you can not just remove the scum, but also damage the heating element.

Back to contents

The best prevention is still nothing came up

In order to in the future you do not raise questions about cleaning the iron, it is better to pay attention to the sole of each immediately after ironing. Wipe it with a mixture of lemon juice and water and finally wipe clean with a dry cloth. A clean pair of holes for help cotton swabs soaked in hydrogen peroxide or vinegar. And most importantly, always observe the temperature regime during the ironing, while your iron will last a very long time!